HP 3500 - Manual (Page 163)

Control panel message Description Recommended action
68.X PERMANENT
STORAGE FULL
alternates with
To continue press
A non-volatile storage device is full.
Press
to clear the message. Printing
can continue, but there could be
unexpected behavior.
X Description
1 for removable disk (flash or hard)
0 for onboard NVRAM
1. Press to continue.
2. For 68.0 errors, turn the printer off
and then back on.
3. If a 68.0 error persists, contact
HP Support.
4. For 68.1 errors, use the HP Web
Jetadmin software to delete files
from the disk drive.
5. For 68.1 errors that persist, contact
HP Support.
68.X PERMANENT
STORAGE WRITE FAIL
alternates with
To continue press
A non-volatile storage device is full.
Press
to clear the message. Printing
can continue, but there could be
unexpected behavior.
X Description
0 for onboard NVRAM
1 for removable disk (flash or hard)
1. Press to continue.
2. If the problem persists, contact
HP Support.
68.X STORAGE ERROR
SETTINGS CHANGED
alternates with
To continue press
One or more printer settings saved in
the non-volatile storage device is invalid
and has been reset to its factory default.
Press
to clear the message. Printing
can continue, but there could be
unexpected behavior.
1. Press to continue.
2. Turn the printer off and then back
on.
3. If the message persists, contact
HP Support.
79.XXXX
PRINTER ERROR
alternates with
To continue
turn off then on
A critical hardware error has occurred. 1. Turn the printer off and then back
on.
2. If the problem persists, contact
HP Support.
8X.YYYY
EIO ERROR
The EIO accessory card in slot X has
encountered a critical error. For the HP Color LaserJet 3700 series
printer only.
1. Turn the printer off and then back
on.
2. If the problem persists, contact
HP Support.
ENWW Control panel messages 151