HP AMD Geode ECM-5510 - Manual (Page 106)

ECM-5510
106 ECM-5510 User’s Manual
Code (hex) Name Description
5E Reserved
5F Reserved
60 Setup enable Display setup message and enable setup functions
61 Reserved
62 Reserved
63 Initialize & Install
Mouse
Detect if mouse is present, initialize mouse, install interrupt
vectors.
64 Reserved
65 PS2 Mouse special Special treatment to PS2 Mouse port
66 Reserved
67 ACPI init ACPI sub-system initializing
68 Reserved
69 Setup Cache Controller Initialize cache controller.
6A Reserved
6B Setup Entering Enter setup check and auto- configuration check up
6C Reserved
6D Initialize Floppy Drive &
Controller
Initialize floppy disk drive controller and any drives.
6E Reserved
6F FDD install Install FDD and setup BIOS data area parameters
70 Reserved
71 Reserved
72 Reserved
73 Initialize Hard Drive &
Controller
Initialize hard drive controller and any drives.
74 Reserved
75 Install HDD IDE device detection and install
76 Reserved
77 Detect & Initialize
Serial/Parallel Port
Initialize any serial and parallel ports (also game port).
78 Reserved
79 Reserved
7A Detect & Initialize Math
Coprocessor
Initialize math coprocessor.
7B Reserved
7C HDD Check for Write
protection
HDD check out