HP 1175C - Manual (Page 89)

12-2 Troubleshooting
To resolve this problem:
1 Press and hold down the Select/Resume button.
When you do this, the paper rollers in the HP OfficeJet Pro move
forward to help eject the jammed paper.
2 If this does not work, press and hold down Select/Resume again.
The paper rollers move in reverse.
3 If the paper is still jammed, repeat steps 1 and 2 to move the paper
rollers forward and backward.
4 Gently remove the paper.
5 If all else fails, remove the paper tray by pinching together the two
levers under the paper tray. Pull the tray toward you, and gently
remove the jammed paper. Then slide the paper tray back into the
copier.
6 Turn the copier off, then on again to continue copying.
Paper Jam with No Front Panel Message
If paper has jammed in the copier, but no message is displayed, press
and hold down the
Select/Resume button on the front panel, then
press the Paper Type button. Then follow the directions on page 12-1.
How to Use the Self Test Page
The Self Test Page lets you know whether the OfficeJet Pro is
operating properly. It lists current, default front panel settings and tells
whether the automatic document feeder is attached properly. You can
also use the Self Test Page to check print alignment.
To print a Self Test Page:
1 Press the Menu button until the message “Self Test Page” appears
on the front panel display.
2 Press the Select/Resume button.
The test page printout has a set of lines which should appear
unbroken, and colored bars which should appear solid. The
intensity of the colors will vary, depending on the type of paper
you are using (that is, plain paper, HP Premium InkJet Paper, and
so on).