HP 2/8q Fibre Channel - Manual (Page 97)

Switch Manager
97 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Interpreting Switch Manager messages
This section lists the Switch Manager messages by task, dialog box, or display. To find a
message and what to do about it, consider what task you are performing, and refer to the
corresponding subsection.
■ Fabrics File—Open, Save messages , page 97
■ Add a Fabric messages , page 97
■ Network Properties dialog box messages , page 98
■ Switch Properties dialog box messages , page 99
■ Port Properties dialog box messages , page 101
■ Faceplate display messages , page 102
■ Load Firmware dialog box messages , page 104
■ Port Loopback Test dialog box messages , page 104
■ Extended Credits wizard messages , page 106
■ Zoning dialog box messages , page 106
■ Restore Configuration dialog box messages , page 108
■ Save Fabric View dialog box messages , page 108
■ Trap Configuration dialog box messages , page 109
Fabrics File—Open, Save messages
Add a Fabric messages
Table 28: Fabrics file—Open, Save messages
Message User action
Failed opening fabrics list file
filename
. Verify that the specified file exists on a file
system that is reachable, and that the user has
permissions to read the file.
Failed saving fabrics list file
filename
. Verify that the specified file system is
reachable, and that the user has permissions
to write to the file system, to the directory, and
to the file.
Table 29: Add a Fabric messages
Message User action
Fabric fabricname already exists!
or
Fabric name already in use.
Specify a name for the fabric that is not
already assigned to an existing fabric.
Invalid IP Address Verify that the IP address specified is
syntactically correctly.
The entry switch is of a type that is not
supported.
The switch hardware or firmware version of
the switch at the specified IP address is not
supported. Choose the IP address of a different
switch, or update the firmware using Telnet or
the appropriate version of the application.