Config command, Config, Command – HP 2/8q Fibre Channel User Manual
Page 119: Authority syntax keywords
Command Line Interface
119
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
DELETE [ALIAS]
Deletes the specified alias given by [alias] from the zoning database. If the alias is a
member of the active zone set, the alias will not be removed from the active zone set
until the active zone set is deactivated.
LIST
Displays a list of all aliases. This keyword does not require an admin session.
MEMBERS [ALIAS]
Displays all members of the alias given by [alias]. This keyword does not require an
admin session.
REMOVE [ALIAS] [MEMBER_LIST]
Removes the ports/devices given by [member_list] from the alias given by [alias]. Use
a
can have any of the following formats:
— Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be
1–-239; port numbers can be 0–-255.
— 6-character hexadecimal device Fibre Channel address (hex)
— 16-character hexadecimal worldwide port name (WWPN) for the device with the
format xx:xx:xx:xx:xx:xx:xx:xx.
RENAME [ALIAS_OLD] [ALIAS_NEW]
Renames the alias given by [alias_old] to the alias given by [alias_new].
Config
command
Manages the Fibre Channel configurations on a switch. For information about setting the port
and switch configurations, refer to the “
Authority
Admin session for all keywords except
Backup
and
List
.
Syntax
config
Keywords
ACTIVATE [config_name]
Activates the configuration given by [config_name]. If you omit [config_name], the
currently active configuration is used. Only one configuration can be active at a time.
BACKUP
Creates a file named
configdata
, which contains the system configuration
information. To download this file, open an FTP session, log in with account
name/password of
images
for both, and type
get configdata
. See “
” on page 114. This keyword does not require an Admin
session.
CANCEL
Terminates the current configuration edit session without saving changes that were
made.