HP 2/8q Fibre Channel - Manual (Page 176)

Command Line Interface
176 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
wwn_c001b0
zone_set_1
wwn_401248
zone_set_1
wwn_02402f
zone_set_1
wwn_22412f
zone_set_1
The following is an example of the Zone Members command:
2/8q FC Switch #> zone members wwn_b0241f
Current List of Members for Zone: wwn_b0241f
---------------------------------
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
21:00:00:e0:8b:02:41:2f
The following is an example of the Zone Zonesets command:
2/8q FC Switch #> zone zonesets zone1
Current List of ZoneSets for Zone: zone1
----------------------------------
zone_set_1
Zoneset
command
Manages zone sets and component zones across the fabric.
Authority
Admin and Zoning Edit. See the “ Zoning command ” on page 178 for information about
starting a Zoning Edit session. The Active , List , and Zones keywords are available
without an Admin session. You must close the Zoning Edit session before using the
Activate and Deactivate keywords.
Syntx
ZONESET
Keywords
ACTIVATE [zone_set]
Activates the zone set given by [zone_set]. This keyword deactivates the active zone
set. Close the Zoning Edit session before using this keyword.