Labels, Transparencies, Labels transparencies – HP 1100A User Manual

Page 156: Label construction

Text mode
Original mode

156 Appendix C Paper specifications

Labels

Label construction

When selecting labels, consider the quality of each component:

●

Adhesives: The adhesive material should be stable at 392 °F
(200 °C), the printer’s maximum temperature.

●

Arrangement: Only use labels with no exposed backing between
them. Labels can peel off sheets with spaces between the labels,
causing serious jams.

●

Curl: Prior to printing, labels must lie flat with no more than 13
mm (0.5 in.) of curl in any direction.

●

Condition: Do not use labels with wrinkles, bubbles, or other
indications of separation.

Transparencies

Transparencies used in the printer must be able to withstand 392 °F
(200 °C), the printer’s maximum temperature.