HP D3604-90004 - Manual (Page 23)

2 Cabling Storage Devices and Setting SCSI Addresses
17
En
g
li
s
h external cables connect from the host system to the rear panel of the storage
system cabinet.
For instructions on connecting the external cables to the storage system, consult
the host system user’s guide or in the case of a DAC card, the user’s guide for the
DAC card.
At least one external SCSI cable is required to attach each storage system to the
host system. All connections from the storage system to the host must be direct.
Do not connect storage systems in series, or connect to other external SCSI
devices.
Many of the cabling configurations need more than one external SCSI cable. If
you need additional cables, they can be ordered from HP. The storage system is
not shipped with external SCSI cables. Table 2-3 lists some of the external SCSI
cables available from HP.
Table 2-3. Optional External SCSI Cables
System or
Accessory
SCSI Port
1.0-Meter Cable
Number 2.5-Meter Cable
Number
NetServer LC
Embedded
Controller Fast SCSI-2 50-pin
high density. 5181-7705 D3635A
NetServer LF
Embedded
Controller Fast SCSI-2 50-pin
high density. 5181-7705 D3635A
NetServer LF Array
Model Fast SCSI-2 50-pin
high density. 5181-7705
C2960A*
D3635A
NetServer LH
Embedded
Controller Fast SCSI-2 50-pin
high density. 5181-7705 D3635A
NetServer LH Array
Model Fast-Wide SCSI-2
68-pin ultra-high
density. C3726A D3637A
NetServer LM
Embedded
Controller Fast SCSI-2 50-pin
high density. 5181-7705 D3635A
NetServer LM Fast SCSI-2 50-pin 5181-7705 D3635A