Humax F2-FOX - Manual (Page 63)

**
8.6 Default Setting
Default Setting restores the receiver to the default settings
Warning: Please note that once you perform Default Setting, all data such as Antenna Setting
information Channel List, and User Configured data are deleted.
To perform Factory Default:
1. Press the MENU button.
2. Select Installation using the button, and press the OK
or button.
3. Enter PIN using the NUMERICAL (0~9) buttons.
4. Select Default Setting using the button, press the OK
or button.
5. Select Yes and press the OK button to restore all settings to
Factory Default.
Select No and press the OK
or BACK button to return
to the previous menu.
6. Confirm again to start loading default setting. Enter PIN using the
NUMERICAL (0~9) buttons to perform restoring.
7. When completing the default setting, press the OK button to
automatically run the Installation Wizard. When default setting
is completed, Installation Wizard is automatically displayed,
which helps Channel Search. For detailed information about
Installation Wizard, refer to 3. Installation Wizard.
**
**
GB 63
**
**
**
**
**
**
**
**
**
**
**
**
**
**