Installation – Humax F2-FOX User Manual
Page 56
**
Edit TP List
You can edit TP list to search at a time and change the setting for Transponder.
1. Select Edit TP List from Multiple Manual Search, and press the
OK
or
button.
2. Select Add and press the OK
button to add a new
Transponder data.
3. Select a specific TP from the Transponder list, press the OK
button, select Edit, and then press the OK
button to edit
Transponder data.
4. Select a specific TP from the Transponder list, press the OK
button, select Delete , and then press the OK
button to
delete Transponder data. You can select multiple TPs to delete.
5. When completing configuring Transponder list, press the BACK
button to return to parent menu. Select Yes and press the
OK
button to confirm to save before moving.
Note: When you select Default List and press OK , Transponder list
display.
**
8.5 Motor Antenna
If you use Motor Antenna, which is operated by motor, you should set the antenna as Motor before Channel
Search.
1. Press the MENU
button.
2. Select Installation using the
button, and press the OK
or
button.
3. Select Antenna Setting using the
button, and press the
OK
or
button.
4. Press the OPT+
button on the Antenna Setting screen to
switch into Motor Antenna Menu.
**
**
8. Installation
GB 56
**
**
**
**
**
**
**
**
**
**
**
**
**
**