Setting preferences – Humax F2-FOX User Manual
Page 44
**
1. i-Plate Display Time
**
You can set the duration during which the Information box is to be displayed when you switch the channel.
1. Select i - Plate Display Time using the
button, and press the OK
or
button.
2. Select a value between 0 ~ 20 seconds using the
button, and press the OK
button.
Note: When it is set to '0', the i-Plate will not be displayed when you switch the channel.
2. OSD Transparency
**
You can set the transparency of On Screen Display.
1. Select OSD Transparency using the
button, and press the OK
or
button.
2. Select one option among Disable/25/50/75 using the
button, and press the OK
button.
Disable
Fully opaque screen
25, 50, 75
As the number is bigger, the screen is more transparent.
3. Option in Channel List
**
You can set the option of scrambled icon in the Option in Channel List.
1. Select the Option in Channel List using the
button, and press the OK
or
button.
2. Select one option from On/Off using the
button, and press the OK
button.
On
Scramble icon display in the channel list.
Off
Scramble icon disappear in the channel list.
**
7. Setting Preferences
GB 44
**
**
**
**
**
**
**
**
**
**
**
**
**
**