beautypg.com

Installation – Humax F2-FOX User Manual

Page 54

background image

**

2. SMATV Search

If your receiver uses the antenna for common use, operate SMATV Search. For SMATV Search, Channel
Search is performed by the antenna for common use regardless of the setting value in Antenna Setting.

Select SMATV Search in Other Search Menu using the

button, and press the OK

or

button.

Frequency

1. Select Frequency using the

button, and press the OK

or

button.

2. Enter the down converted frequency through common LNB. You

can enter the frequency between 950 and 2150 MHz.

**

Polarisation

1. Select Polarisation using the

button, and press the OK

or

button.

2. Select one from Disable/Auto/Horizontal/Vertical and press the

OK

button.

Note: Horizontal outputs 18V, and Vertical outputs 13V through LNB

line. Select Disable when LNB Power is not necessary.

**

Symbol Rate

1. Select Symbol Rate using the

button, and press the OK

or

button.

2. Select the symbol rate of the transponder.

If the rate does not exist in the List, select User Define and enter
the value directly.

**

8. Installation

GB 54

**

**

**

**

**

**
**

**

**

**

**

**
**

**