Humax F2-FOX - Manual (Page 16)

**
3.4 Automatic Search
You can automatically search for satellites according to the Antenna Setting.
Please wait for finishing the Automatic Search. If you want to stop the
Automatic Search, select the OK
button.
If the Automatic Search is stopped or finished, the selected result is
automatically saved and go to the next step.
3.5 Time Setting
You can set the current time.
Press the OK or button to display the values for GMT Offset.
Select the appropriate GMT Offset value using the button and
press the OK button to set the current time. Check the current time
at the bottom of the screen to see if it's correctly set up. Then select
Next using the
button and press the OK button to finish
Installation Wizard.
**
Warning: Press the EXIT button to save the previous input information and exit the Installation Wizard
when running the Installation wizard. If you exit the Install Wizard without fully completing the
setting procedures, you may not watch any broadcasting normally. In this case, you can use the
Menu - Installation - Antenna Setting and Channel Search menu to configure your receiver as
you like.
**
3. Installation Wizard
GB 16
**
**
**
**
**
**
**
**
**
**
**
**
**
**