Humax F2-FOX - Manual (Page 61)

**
4. Installer Menu
You can set default setting and operation limit for Motor Antenna.
1. Select Installer Menu from Motor Antenna Menu using the button.
2. Press the OK button to move to Installer Menu.
**
Motor Limit Setting
You can set the maximum Motor Limit both East and West to prevent damage to the antenna.
1. Select Motor Limit using the button.
2. Set Motor Limit to Disable by pressing the OK or button.
**
Enable Motor Limit is already set. Motor does not move
more than the amount of limit.
Time Motor Limit is disabled. Setting is released.
Note: When newly setting Motor Limit, set the value to Disable.
3. Select Limit Position using the button.
4. Select the Direction of Limit by pressing the OK or
button.
**
East Motor sets East limit to move.
West Motor sets West limit to move.
5. Select Set Limit using the button.
6. Move antenna to the Limit Position to set using button.
7. Press the OK button to set Limit.
8. If Limit is set, Motor Limit option is automatically changed into
Enable.
**
**
GB 61
**
**
**
**
**
**
**
**
**
**
**
**
**
**