Humax F2-FOX - Manual (Page 49)

**
Channel Type
You can search by TV or Radio channel.
1. Select Channel Type using the button, and press the OK
or button.
2. Select one option among All, TV and Radio using the
button.
All Searches all channels.
TV Search only TV channels.
Radio Searches only Radio Channel.
**
Search
**
You can complete the setting and start searching.
1. Select Search, and press the OK button to start Automatic
Search.
2. During operating search, the cursor is located at Stop. Therefore,
if you press the OK button during searching, the operation is
stop and the channels found until then will be displayed.
3. If search operation is successfully completed, and the channel
does not exist, press the OK button and try to reset the
search operation again if necessary.
4. You can delete unnecessary channels from the searched
channels. Select your desired channels to delete and press the
OK
button. Then select Delete and press the OK
button. To delete all channels, select Select All to select all
channels, select Delete, and press the OK
button.
5. When completing Channel Search and deleting unnecessary
channels, select Save to save the changes.
**
**
GB 49
**
**
**
**
**
**
**
**
**
**
**
**
**
**