Humax F2-FOX - Manual (Page 43)

**
6. NTSC Mode
If TV Standard is set to NTSC, set the following mode.
1. Select NTSC Mode using the button, and press the OK or button.
2. Select one option from 3.58/4.43 using the button.
Note: Only when TV Standard is set to Auto, set the NTSC mode.
7. Audio Output
Set the Audio Output.
1. Select Audio Output using the button, and press the OK or button.
2. Select one option form Stereo or Mono using the button.
Note: When you select Mono, the sound is softer than Stereo.
7.6 UHF
**
This receiver doesn't provide this function.
7.7 Miscellaneous Settings
1. Press the MENU button.
2. Select Preferences using the button, and press the OK
or button.
3. Select Miscellaneous Settings using the button, and
press the OK or button.
**
**
GB 43
**
**
**
**
**
**
**
**
**
**
**
**
**
**