Installation – Humax F2-FOX User Manual
Page 48
**
8.2 Automatic Search
If you select the satellite to search channel according to the Antenna Setting, you can automatically search the
satellite without entering any other information. And you cannot watch any programme without searching
channel.
1. Select MENU
button.
2. Select Installation using the
button, and press the OK
or
button.
3. Select Automatic Search from Installation menu using the
button, and press the OK
or
button.
**
Satellite
You can select which satellite to search the channel.
1. Select Satellite using the
button, and press the OK
or
button.
2. Select one of satellites using the
button, and press the OK
button.
Note: Channel Search is performed only for the satellites that have
been set to Enable in Antenna Setting-Satellite Alternative menu.
If you wish to search channels for satellites, which is not listed on
the Satellite List of Automatic Search, move to Antenna Setting
and set the Satellite Alternative item as Enable.
**
Search Type
You can set Search Type to search by Free channel or CAS type.
1. Select Search Type using the
button, and press the OK
or
button.
2. Select All and FTA using the
button, and press the OK
button.
All
Searches all channels.
FTA
Searches only free channels.
**
8. Installation
GB 48
**
**
**
**
**
**
**
**
**
**
**
**
**
**