Humax F2-FOX - Manual (Page 3)

**
This digital satellite receiver has been manufactured to comply with international safety standards. Please
read the following safety precautions carefully.
**
Safety Instructions and Precautions
**
1. MAINS SUPPLY
**
90 - 250V AC 50/60Hz
Operate your product only from the type of power supply indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your local power company. Disconnect the
receiver from the mains before you start any maintenance or installation procedures.
**
2. OVERLOADING
**
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.
**
3. LIQUIDS
**
The receiver should not be exposed to any liquids such as dripping or splashing. In addition, no objects
filled with liquids, such as vase, should be placed on the apparatus.
**
4. CLEANING
**
Disconnect the receiver from the wall outlet before cleaning. Use a light damp cloth (no solvents) to
dust the receiver.
**
5. VENTILATION
**
The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Do not stand
the receiver on soft furnishings or carpets. Do not stack electronic equipment on top of the receiver.
**
6. ATTACHMENTS
**
Do not use any unsupported attachments as these may be hazardous or cause damage the receiver.
**
7. CONNECTION TO THE SATELLITE DISH LNB
**
Disconnect the receiver from the mains before connecting or disconnecting the cable from the satellite
dish. Failure to do so can damage the LNB.
**
8. CONNECTION TO THE TV
**
Disconnect the receiver from the mains before connecting or disconnecting the cable from the satellite
dish. Failure to do so can damage the TV.
**
9. EARTHING
**
The LNB cable must be buried in the ground. The buried cable of the system must comply with SABS
061.
**
Safety and Warning
GB 3
**
**
**
**
**
**
**
**
**
**
**
**
**
**