Humax F2-FOX - Manual (Page 58)

**
2. Edit Satellite Data
You can set the position of the Satellite, which the Motor Antenna heads for, and decide whether or not to use
the satellite.
1. Select Edit Satellite Data from Motor Antenna Menu using the
button.
2. Move to Edit Satellite Data by pressing the OK button.
3. Select Satellite using the button, and press the OK
button.
4. Select a satellite to edit, and press the OK button.
5. Select Satellite Alternative using the button and press the
OK button to decide whether or not to use the selected
Satellite.
**
Enable Currently selected satellite is listed on Motor
Setting. Channel Search is available.
Disable Currently selected Satellite is regarded as out of
existence. Channel Search is unavailable.
6. Select Satellite Longitude using the button, and press the
OK button.
7. Enter the Longitude value for Satellite using the NUMERICAL
(0~9) buttons. Change East/West value using the button.
**
8. Installation
GB 58
**
**
**
**
**
**
**
**
**
**
**
**
**
**