Humax F2-FOX - Manual (Page 60)

**
6. Confirm Signal Strength and Quality Level and fine-tune the
Antenna direction.
**
• Select Go to Stored Position using the button.
• Move the Antenna to East/West by pressing / button.
Adjust Signal Level to maximum.
7. Save the adjusted position of Satellite.
**
• Select Store Current Position using the button.
• Press the OK button to save the Antenna position
headed for the selected Satellite.
8. You can set antenna position by satellite by repeating the above
procedure.
9. You can recalculate positions for all other satellite based on one
satellite. Adjust position of antenna by satellite based on one set
position without setting each position of antenna by satellite.
**
• Select Recalculation using the button.
• Press the OK button.
• To adjust all positions again, select Yes and press the OK
button.
Note: If you select Recalculation with selecting Reference for Satellite
option, the antenna is reset to default.
**
**
8. Installation
GB 60
**
**
**
**
**
**
**
**
**
**
**
**
**
**