Humax F2-FOX - Manual (Page 62)

**
Reset Position
You can restore the position saved at Motor Antenna to the default setting.
1. Select Reset Positions using the button.
2. Press the OK button.
3. Select Yes and press the OK button to restore all saved
value at Motor Antenna to the default setting.
4. Please wait during the Motor Antenna is restored.
Note: Motor Antenna may not be reset depending on Antenna
condition. In this case, please repeat the above procedure again.
**
8. Installation
GB 62
**
**
**
**
**
**
**
**
**
**
**
**
**
**