Humax F2-FOX User Manual

Page 15

2. Set the LNB Frequency value

Press the OK

button to display LNB Frequency List.

Select LNB Frequency using the

button, and press the

button.

If you cannot find the LNB Frequency value from the list, select
User Define, manually enter the frequency using the
NUMERICAL (0~9) button, and then press the OK

button.

Note: When using Universal LNB, select Universal for LNB

Frequency which is 9750/10600 (MHz). Also, if you
select Universal, 22KHz tone value is disabled.

3. Set up 22kHz Tone.

Select 22kHz Tone using the

button, and press the OK

button to change the setting. When using 22kHz tone

switch, select Enable. Otherwise, select Disable.

4. Select DiSEqC switch.

Select DiSEqC item using the

button, and press the OK

button to display DiSEqC Switch List.

Select DiSEqC Switch using the

button and then press the

button.

5. When you complete the setting, select Next using the

button and press the OK

button to start Automatic Search.

Note:

•

If the antenna is correctly set up, the level at signal strength bar and quality bar, which are located at
the bottom of the screen, are generally moved up.

•

If you encounter any problems or questions when setting up the antenna, please contact your local
product installer or distributor.

GB 15

**
**