Humax F2-FOX - Manual (Page 45)

**
This chapter describes how to search for channels and a series of procedures.
8.1 Antenna Setting
You can set Antenna and LNB Information channel search. If antenna is
not correctly set, you cannot search channel, therefore, you cannot
watch a programme, either.
1. Press the MENU button.
2. Select Installation using the button, and press the OK
or button.
3. Password is required to use Installation Menu. Enter Password to
directly move to Installation Menu.
4. Select Antenna Setting using the button, and press the
OK or button to enter Antenna Setting.
Note: If no satellite is registered from Antenna Setting menu, Channel
Search such as Automatic Search, Manual Search, Multiple
Manual Search, Advanced Search is not available.
**
Satellite
You can select satellite for Channel Search.
1. Select Satellite using the button, and press the OK or
button.
2. Select one option that is the antenna heads for from the
alphabetically sorted satellite list using the button, and
press the OK button.
3. If no desired satellite exists in the list, select User Define Satellite
item. When you are prompted to select whether or not to edit
User Define Satellite, select Yes, and press the OK to display
keyboard to edit the Name. Enter Satellite Name directly, select
OK and press the OK
button.
**
8. Installation
GB 45
**
**
**
**
**
**
**
**
**
**
**
**
**
**