HP R717 - Manual (Page 37)

37 Taking Pictures and Recording Video Clips
Using Live View
The Image Display allows you to frame pictures and video
clips using Live View. To activate Live View from the menus or
when the Image Display is off, press the Live View
button. To turn off Live View, press the Live View button
again.
TIP: Using Live View increases the rate of battery drain. To
conserve battery power, use the viewfinder instead.
TIP: If you prefer not to use Live View, you can set the
camera to start up with Live View turned off (see Live View
at Power On on page 127).
NOTE: In low light, the scene in the Image Display may
appear as gray or subdued colors. This is done to show
more detail.
The following table describes the information that is
displayed in Live View when the camera settings are at their
default values and an optional memory card is installed in
the camera. If you change other camera settings, icons for
those settings will also be displayed in the Live View screen.
2
4
5
7
1
6
3