HP R717 - Manual (Page 13)

13 Getting Started
2. Attach the Wrist Strap
Attach the wrist strap to the
wrist strap mount on the
side of the camera as
shown.
3. Install the Battery
Your camera can use either a rechargeable HP Photosmart
R07 Lithium Ion battery (L1812A/L1812B) or a disposable
Duracell® CP1 battery.
1. Open the Battery/
Memory Card door on
the bottom of the camera
by sliding the door to the
back of the camera.
2. Insert the battery in the
larger slot as shown, and
push it in until the latch
catches.
3. Close the Battery/Memory card door by pushing the
door down and then sliding the door toward the front of
the camera until the door latches.
To remove the battery from the camera, first turn the camera
off. Then open the Battery/Memory card door, release the
battery latch, tilt the camera, and the battery will slide out of
its slot.