HP R717 - Manual (Page 168)

168 HP Photosmart R717 User’s Manual
The image is too
large to magnify.
The image was
taken with
another camera.
Transfer the image to your
computer and view it using
the HP Image Zone
software.
The image is too
large to rotate.
The image was
taken with
another camera.
Transfer the image to your
computer and rotate it
using the HP Image Zone
software.
Unknown image
error. Unable to
complete request.
The camera
could not
complete the
image
modification you
requested.
• Try modifying the
image again.
• If the same message
displays, transfer the
image to your
computer and modify it
using the HP Image
Zone software.
Camera has
experienced an
error.
or
Camera has
experienced an
error and is
shutting down.
The camera may
have experienced
a transient
problem.
Turn the camera off, if it is
on, and then on again. If
that does not fix the
problem, try resetting the
camera (see page 136). If
the problem persists, note
the error code and then
call HP Support (see
page 174).
Message Possible cause Solution