HP R717 - Manual (Page 130)

130 HP Photosmart R717 User’s Manual
TV Configuration
This setting allows you to set the format of the video signal
for displaying camera images on a television (TV) that is
connected to the camera with an optional HP Photosmart
R-series camera dock.
The default TV Configuration setting depends on the
language and region that you selected when you turned on
the camera for the first time.
1. In the Setup Menu (page 121),
select TV Configuration.
2. In the TV Configuration sub-
menu, highlight one of these two
choices:
• NTSC—Used primarily in
North America, parts of
South America, Japan, Korea, and Taiwan
• PAL—Used primarily in Europe, Uruguay, Paraguay,
Argentina, and parts of Asia
TIP: If the current setting does not work where you live, try
the other setting.
3. Press the button to save the setting and return to the
Setup Menu.
The new setting remains in effect until it is changed again,
even when you turn the camera off. For more information on
connecting the camera to a TV, see the dock User’s Manual.
NOTE: When viewing images on a TV, the rate at which
images are displayed can be affected by the speed of an
optional memory card, or by the quantity and size of
images or video clips being viewed.