Restore the copy-settings defaults, Copy a book (photo card models only) – HP CM1312 MFP Series User Manual
Page 92

Change the default media-type setting
1.
On the product control panel, press
Setup
.
2.
Use the arrow buttons to select
System setup
, and then press
OK
.
3.
Use the arrow buttons to select Paper setup, and then press
OK
.
4.
Use the arrow buttons to select Default paper type, and then press
OK
.
5.
Use the arrow buttons to select a media type, and then press
OK
.
6.
Press
OK
to save the selection.
Restore the copy-settings defaults
Use the control panel to restore the copy settings to the factory-set default values.
1.
On the product control panel, press
Setup
.
2.
Use the arrow buttons to select
Copy setup
, and then press
OK
.
3.
Use the arrow buttons to select Restore defaults, and then press
OK
.
Copy a book (photo card models only)
1.
Lift the lid and place the book on the flatbed scanner with the page that you want to copy at the
lower-right corner of the glass.
80
Chapter 9 Copy
ENWW