HP CM1312 MFP Series - Manual (Page 32)

Menu item Sub-menu item Sub-menu item Description
PowerSave Time Off
1 minute
15 minutes
30 minutes
1 hour
2 hours
4 hours
Specify the amount of idle time
before the product enters sleep
mode.
USB speed High
Full
Sets the USB speed.
Less paper curl On
Off
When printed pages are
consistently curled, this option
sets the product to a mode that
reduces curl.
The default setting is Off.
Archive print On
Off
When printing pages that will
be stored for a long time, this
option sets the product to a
mode that reduces toner
smearing and dusting.
The default setting is Off.
Restore defaults Sets all customized settings to
the factory default values.
Table 2-7 Network configuration menu
Menu item Sub-menu item Description
TCP/IP configuration Automatic
Manual
Automatic automatically configures all the TCP/IP settings via
DHCP, BootP or AutoIP.
Manual requires you to manually configure the IP address, subnet
mask, and default gateway.
The control panel prompts you to specify values for each address
section. Use the arrow buttons to increase or decrease the value.
Press
OK to accept the value and move the cursor to the next field.
As each address is completed, the product prompts for address
confirmation before moving to the next one. After all three
addresses are set, the product automatically restarts.
Memory Card (memory
card products only) On
Off
Enables or disables the use of the memory card slots.
Auto crossover On
Off
Enable or disable the use of a standard 10/100 network cable when
the product is directly connected to a PC.
Table 2-6 Service menu (continued)
20 Chapter 2 Control panel ENWW