Change memory card default settings – HP CM1312 MFP Series User Manual
Page 165
Change memory card default settings
The HP LaserJet CM1312 (fax/photo-card model) product comes with default settings that you can
change for photo printing from the product control panel.
NOTE:
The default settings remain as selected until you change and save them again. If you want to
change the settings temporarily for a particular photo-printing job, see
Print photos directly from the
1.
Press
Setup
.
2.
Use the arrow buttons to select Photo setup, and then press
OK
.
3.
Use the arrow buttons to select one of the following menu items, and then press
OK
.
●
Default image Size: The default image size for photos.
●
Default lighter/darker: Change the light and dark setting for the image that you are printing.
●
Default number of copies: Change the number of copies that you want to print.
●
Default output color: Set whether you are printing in color or black and white.
●
Restore defaults: This returns all photo settings to the factory defaults.
4.
Use the arrow buttons to change the setting, and then press
OK
to save the change or, press
X
to
exit the menu without saving changes.
5.
Repeat these steps for each menu item that you want to change.
ENWW
Change memory card default settings 153