HP CM1312 MFP Series - Manual (Page 33)

Menu item Sub-menu item Description
Network services IPv4
IPv6
DHCPv6
Sets whether the product will use either IPv4, IPv6, or DHCPv6
protocol.
Show IP address Yes
No
Sets whether the product displays the IP address on the control
panel.
Link speed Automatic (Default)
10T Full
10T Half
100TX Full
100TX Half
Sets the link speed manually if needed.
After setting the link speed, the product automatically restarts.
Restore defaults Resets all network configurations to their factory defaults.
Function specific menus (HP LaserJet CM1312 (fax/photo-card model) only)
The product features function-specific menus for faxing, copying, scanning, and managing photos on a
memory card. To access these menus, press the
Fax Menu Copy Menu Scan Menu or Photo Menu
buttons respectively.
These are the features supported by the function specific menus.
● Use the Fax menu to perform basic fax functions such as sending a fax or editing the phone book,
reprinting faxes that were previously printed, or printing faxes that are stored in memory.
● Use the Copy menu to access basic copy functions and customize the copy output.
● Use the Scan menu to scan to a memory card.
● Use the Photo menu to display a list of photo options for a valid inserted memory card.
Table 2-7 Network configuration menu (continued)
ENWW Control-panel menus 21