Home Dynamix ANEXX A User Manual
Page 26
4 Ports 11g Wireless ADSL2/2+ Router
19
B.
Windows 2000:
1. Click “Start” and “Run”.
2.
In the open field, enter “cmd” then click “OK”.
3.
In the command prompt, type “ipconfig /all”, then press “Enter”.
All the Ethernet adapter information will be shown in the appear Windows. Check if you can
get the following setting:
The
IP Address as 192.168.1.x
The
Subnet Mask as 255.255.255.0
The
Default Gateway as 192.168.1.1
4. Type
“Exit” to end up the process.