Home Dynamix ANEXX A - Manual (Page 116)

4 Ports 11g Wireless ADSL2/2+ Router 109
„ Direction: Normally when RIP is enabled on a router it dynamically learns/provides routes on all
it's configured interfaces. This parameter allows you to select the interfaces on which RIP is
expected to learn and distribute routing information. This feature allows the user to control how
and which routes get distributed through the network e.g. by selecting “In Only” mode, it prevent
routes to the private LAN networks from being sent over to the WAN side router. The following four
direction options are available:
; Both: Receive updates on the interface and also send it's routing table to other routers
connected to that interface.
; In: Receive routing updates from other routers connected to that interface but NOT send
routing updates on that interface.
; Out: Send routing updates but not receive updates on this interface from the other routers
connected to that interface.
; None: Ignores this interface and not send or receive routing updates through this interface.
„ Apply: Click Apply to complete the setting.
„ Cancel: Click Cancel to ignore all the changes.
„ To complete and save the setting, click Save All after clicking the Apply button.