Home Dynamix ANEXX A User Manual
Page 124
4 Ports 11g Wireless ADSL2/2+ Router
117
;
11b only Mode: The legacy SR IE contains only the 802.11b legacy supported rates. The
extended SR IE is not present.
;
11b+ Mode: Similar to the “802.11b-only” mode except that 22Mbps PBCC rate/modulation
is included, which is TI proprietary.
;
11g only Mode: The legacy SR IE contains only the OFDM additional supported rates. The
extended SR IE contains the extended supported rates, if present.
4X: Same as TI’s “11b+” mode, which enables/disables the 4x feature. This function is TI
proprietary and is only available when both TI wireless station card and TI ADSL2/2+ modem are
used.
User Isolation: If enabled, Wireless Stations will not be able to communicate with each other or
with stations on the wired network. This feature normally should be disabled.
Apply: Click Apply to complete the setting.
Cancel: Click Cancel to ignore all the changes.
To complete and save the setting, click Save All after clicking the Apply button.