Home Dynamix ANEXX A - Manual (Page 143)

4 Ports 11g Wireless ADSL2/2+ Router 136
4.6 TOOLS
Figure below shows the TOOLS main screen, which can be accessed by clicking on the TOOLS tab from the
top of the screen. This screen provides access to the following tools screens:
; System Commands
; Remote Log
; User Management
; Update Gateway
; Ping Test
; Modem Test
; Save All
„ System Commands: Save the current configuration, restart the 4 Ports 11g Wireless ADSL2/2+
Router and restore to factory defaults setting.
„ Remote Log: Setup Remote Log Information.
„ User Management: Configure user name and password.
„ Update Gateway: Upgrade the 4 Ports 11g Wireless ADSL2/2+ Router firmware.
„ Ping Test: Run a ping test.
„ Modem Test: Check whether the modem with a specific connection is properly connected to the
network.
„ Save All: Save the device setting.