Hitachi ULTRASTAR 15K450 HUS154530VLF400 - Manual (Page 296)

Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
280
19.50 WRITE (6) - (0A)
Table 238: WRITE (6) - (0A)
The WRITE command requests the drive to write the specified number of blocks of data (Transfer Length) from the Initiator
to the medium starting at the specified Logical Block Address (LBA).
See Section 19.15 “READ (6) - (08)” on page 208 for the parameters.
Byte
Bit
7 6 5 4 3 2 1 0
0 Command Code = 0Ah
1 Reserved = 0 (MSB) LBA
2-3
Logical Block Address
(LSB)
4 Transfer Length
5 VU = 0 Reserved = 0 FLAG LINK