38 seek (6) - (0b), 39 seek (10) - (2b) – Hitachi ULTRASTAR 15K450 HUS154530VLF400 User Manual
Page 277

Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
261
19.38 SEEK (6) - (0B)
Table 220: SEEK (6) - (0B)
The SEEK (6) command requests the drive to seek the specified LBA. If the LBA is greater than the value returned by the
READ CAPACITY command, the Drive returns a Check Condition status with a sense key of Illegal Request and an addi-
tional sense code of Invalid Field in CDB.
19.39 SEEK (10) - (2B)
Table 221: SEEK (10) - (2B)
The SEEK (10) command requests the drive to seek the specified LBA. If the LBA is greater than the value returned by the
READ CAPACITY command, the Drive returns a Check Condition status with a sense key of Illegal Request and an addi-
tional sense code of Invalid Field in CDB.
Byte
Bit
7
6
5
4
3
2
1
0
0
Command Code = 0Bh
1
Reserved = 0
(MSB) LBA
2
3
Logical Block Address
(LSB)
4
Reserved = 0
5
VU = 0
Reserved = 0
FLAG
LINK
Byte
Bit
7
6
5
4
3
2
1
0
0
Command Code = 2Bh
1
Reserved = 0
Reserved = 0
0
2-5
(MSB)
Logical Block Address
(LSB)
6-8
Reserved = 0
9
VU = 0
Reserved = 0
FLAG
LINK