Hitachi ULTRASTAR 15K450 HUS154530VLF400 Instruction Manuals and User Guides

We have 1 Instruction Manual and User Guide for ULTRASTAR 15K450 HUS154530VLF400 Hitachi

Hitachi ULTRASTAR 15K450 HUS154530VLF400 User Manual, 417 pages

Recognized languages:	English
Pages:	417
Size:	3.39 MB

Show table of contents

Document Outline

1.0 General
- 1.1 Introduction
- 1.2 Glossary
- 1.3 Caution
2.0 Outline of the Drive
3.0 Fixed-disk Subsystem Description
- 3.1 Control Electronics
- 3.2 Head Disk Assembly
- 3.3 Actuator
4.0 Drive Characteristics
- 4.1 Formatted Capacity
- 4.2 Data Sheet
- 4.3 Inquiry Information
  - 4.3.1 Product ID
  - 4.3.2 World Wide ID - Block Assignment
- 4.4 Cylinder allocation
- 4.5 Performance characteristics
5.0 Data Integrity
- 5.1 Equipment Status
- 5.2 Error Recovery Procedure
6.0 Physical Format
- 6.1 Shipped Format (P-List)
- 6.2 Reassigned Format (G-List)
7.0 Electrical Interface
- 7.1 FC-AL Connector
8.0 Environment
- 8.1 Temperature and humidity
- 8.2 Storage requirements
  - 8.2.1 Packaging
  - 8.2.2 Storage time
- 8.3 Corrosion test
- 8.4 Cooling requirements
9.0 DC Power Requirements
- 9.1 Power Supply Current, Average and Peak
- 9.2 Ripple Voltage
- 9.3 Power Consumption Efficiency Index
10.0 Reliability
- 10.1 Start/Stop Cycles
- 10.2 Data Reliability
- 10.3 Seek errors
- 10.4 Failure prediction (PFA/S.M.A.R.T)
- 10.5 Preventive Maintenance
- 10.6 Temperature Warning
11.0 Mechanical Specifications
- 11.1 Outline
- 11.2 Mechanical Dimensions
- 11.3 Interface Connector
- 11.4 Mounting Positions and Tappings
- 11.5 Drive Mounting
- 11.6 Heads Unload and Actuator Lock
12.0 Vibration and Shock
- 12.1 Operating Vibration
  - 12.1.1 Random Vibration
  - 12.1.2 Swept Sine Vibration
- 12.2 Non-operating Vibrations
  - 12.2.1 Random Vibration
  - 12.2.2 Swept Sine Vibration
- 12.3 Operating shock
- 12.4 Non-operating shock
  - 12.4.1 Half sinewave shock pulse
  - 12.4.2 Rotational shock
13.0 Acoustics
- 13.1 Sound power levels
14.0 Identification
- 14.1 Labels
15.0 Electromagnetic Compatibility
- 15.1 Class A Regulatory Notices
16.0 Standards
- 16.1 UL and C-UL Standard Conformity
- 16.2 European Standards Compliance
- 16.3 German Safety Mark
- 16.4 Flammability
- 16.5 Corporate Standards Compliance
17.0 FC-AL attachment
- 17.1 Fundamentals
- 17.2 Basic Link Services
- 17.3 Extended Link Services
- 17.4 Common Fibre Channel Services
  - 17.4.1 Register FC-4 Types (RFT_ID)
- 17.5 FC-AL timers
  - 17.5.1 Link Failure
- 17.6 Invalid frame delimiter
18.0 SCSI-FCP
- 18.1 Terminology
- 18.2 Information Units
- 18.3 Task Attributes
- 18.4 Task Management functions
- 18.5 Miscellaneous
19.0 SCSI Command Set
- 19.1 SCSI Control Byte
- 19.2 Abbreviations
- 19.3 Byte ordering conventions
- 19.4 FORMAT UNIT (04)
  - 19.4.1 Parameter List Header
  - 19.4.2 Defect Descriptor
- 19.5 INQUIRY (12)
  - 19.5.1 Inquiry Data
- 19.6 LOG SELECT (4C)
- 19.7 LOG SENSE (4D)
  - 19.7.1 Log Page parameters
  - 19.7.2 Log Sense Page 0
  - 19.7.3 Log Sense Page 2
  - 19.7.4 Log Sense Page 3
  - 19.7.5 Log Sense Page 5
  - 19.7.6 Log Sense Page 6
  - 19.7.7 Log Sense Page D
  - 19.7.8 Log Sense Page E
  - 19.7.9 Log Sense Page F
  - 19.7.10 Log Sense Page 10
  - 19.7.11 Log Sense Page 15
  - 19.7.12 Log Sense Page 2F
  - 19.7.13 Log Sense Page 30
  - 19.7.14 Log Sense Page 37
- 19.8 MODE SELECT (15)
- 19.9 MODE SELECT (55)
- 19.10 MODE SENSE (1A)
  - 19.10.1 Mode Parameter List
  - 19.10.2 Mode Page 00 (Vendor Unique Parameters)
  - 19.10.3 Mode Page 01 (Read/Write Error Recovery Parameters)
  - 19.10.4 Mode Page 02 (Disconnect/Reconnect Parameters)
  - 19.10.5 Mode Page 03 (Format Device Parameters)
  - 19.10.6 Mode Page 04 (Rigid Disk Drive Geometry Parameters)
  - 19.10.7 Mode Page 07 (Verify Error Recovery Parameters)
  - 19.10.8 Mode Page 08 (Caching Parameters)
  - 19.10.9 Mode Page 0A (Control Mode Page Parameters)
  - 19.10.10 Control Extension Subpage
  - 19.10.11 Mode Page 0C (Notch Parameters)
  - 19.10.12 Mode Page 19h (Fibre Channel Port Control Page)
  - 19.10.13 Mode Page 1A (Power Control)
  - 19.10.14 Mode Page 1C (Informational Exceptions Control)
- 19.11 MODE SENSE (5A)
- 19.12 PERSISTENT RESERVE IN (5E)
  - 19.12.1 Service Action
  - 19.12.2 Parameter data for Read Keys
  - 19.12.3 Parameter Data for Read Reservations
- 19.13 PERSISTENT RESERVE OUT (5F)
  - 19.13.1 Service Action
  - 19.13.2 Type
  - 19.13.3 Parameter list
  - 19.13.4 Summary
- 19.14 PRE-FETCH (34)
- 19.15 READ (6) - (08)
- 19.16 READ (10) - (28)
- 19.17 READ (12) - (A8)
- 19.18 READ (16) - (88)
- 19.19 READ (32) - (7F/09)
- 19.20 READ BUFFER (3C)
  - 19.20.1 Combined Header And Data (Mode 00000b)
  - 19.20.2 Read Data (Mode 00010b)
  - 19.20.3 Descriptor (Mode 00011b)
  - 19.20.4 Read Data from Echo Buffer (Mode 01010b)
  - 19.20.5 Echo Buffer Descriptor (Mode 01011b)
  - 19.20.6 Enable Expander Communications Protocol and Echo Buffer (Mode11010b)
- 19.21 READ CAPACITY (10) - (25)
- 19.22 READ CAPACITY (16) (9E/10)
  - 19.22.1 Returned Data Format
- 19.23 READ DEFECT DATA (37)
  - 19.23.1 Defect List Header
  - 19.23.2 Defect List Descriptor
  - 19.23.3 Bytes from Index Format (100b)
  - 19.23.4 Physical Sector Format (101b)
- 19.24 READ DEFECT DATA (B7)
  - 19.24.1 Defect List Header
  - 19.24.2 Defect List Descriptor
  - 19.24.3 Bytes from Index Format (100b)
  - 19.24.4 Physical Sector Format (101b)
- 19.25 READ LONG (3E)
- 19.26 REASSIGN BLOCKS (07)
- 19.27 RECEIVE DIAGNOSTICS RESULTS (1C)
  - 19.27.1 Receive Diagnostic Results Page 0
  - 19.27.2 Enclosure Service Information (ESI) Page Format
  - 19.27.3 Receive Diagnostic Results Page 40
  - 19.27.4 Receive Diagnostic Page A0h
- 19.28 RELEASE (17)
- 19.29 RELEASE (57)
- 19.30 REPORT DEVICE IDENTIFIER (A3/05)
- 19.31 REPORT LUNS (A0)
- 19.32 REPORT SUPPORTED OPERATION CODES (A3/0C)
  - 19.32.1 All_commands parameter data format
  - 19.32.2 One_command parameter data format
- 19.33 REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS (A3/0D)
- 19.34 REQUEST SENSE (03)
- 19.35 RESERVE (16)
- 19.36 RESERVE (56)
- 19.37 REZERO UNIT (01)
- 19.38 SEEK (6) - (0B)
- 19.39 SEEK (10) - (2B)
- 19.40 SEND DIAGNOSTIC (1D)
  - 19.40.1 Send Diagnostic Page 0
  - 19.40.2 Send Diagnostic Page 40
  - 19.40.3 Send Diagnostic Page A0h
- 19.41 SET DEVICE IDENTIFIER (A4/06)
- 19.42 START STOP UNIT (1B)
- 19.43 SYNCHRONIZE CACHE (10) - (35)
- 19.44 SYNCHRONIZE CACHE (16) - (91)
- 19.45 TEST UNIT READY (00)
- 19.46 VERIFY (2F)
- 19.47 VERIFY (12) - (AF)
- 19.48 VERIFY (16) - (8F)
- 19.49 VERIFY (32) - (7F/0A)
- 19.50 WRITE (6) - (0A)
- 19.51 WRITE (10) - (2A)
- 19.52 WRITE (12) - (AA)
- 19.53 WRITE (16) - (8A)
- 19.54 WRITE (32) - (7F/0B)
- 19.55 WRITE AND VERIFY (10) - (2E)
- 19.56 WRITE AND VERIFY (12) - (AE)
- 19.57 WRITE AND VERIFY (16) - (8E)
- 19.58 WRITE AND VERIFY (32) - (7F/0C)
- 19.59 WRITE BUFFER (3B)
  - 19.59.1 Combined Header And Data (Mode 00000b)
  - 19.59.2 Write Data (Mode 00010b)
  - 19.59.3 Download Microcode (Mode 00100b)
  - 19.59.4 Download Microcode and Save (Mode 00101b) -Single Binary File
  - 19.59.5 Download Microcode and Save (Mode 00111b) - Multiple Binary Files
  - 19.59.6 Write Data to Echo Buffer (Mode 01010b)
  - 19.59.7 Enable Expander Communications Protocol (Mode 11010b)
- 19.60 WRITE LONG (3F)
- 19.61 WRITE SAME (41)
- 19.62 WRITE SAME (16) - (93)
- 19.63 WRITE SAME (32) - (7F/0D)
20.0 SCSI Status Byte
21.0 Additional information
- 21.1 Obtaining an AL_PA
- 21.2 Loop Initialization Procedure
- 21.3 Flow Control
- 21.4 Login Requirements
- 21.5 Public Loop Operation
  - 21.5.1 NL_Port Initialization
- 21.6 SCSI Protocol
  - 21.6.1 Priority of SCSI Status Byte Reporting
  - 21.6.2 Invalid LUN Processing
  - 21.6.3 Overlapped Commands
  - 21.6.4 Command Processing During Execution of Active I/O Process
  - 21.6.5 Unit Attention Condition
  - 21.6.6 Command Processing During Startup and Format Operations
  - 21.6.7 Internal Error Condition
  - 21.6.8 Deferred Error Condition
  - 21.6.9 Degraded Mode
  - 21.6.10 Command Processing while Reserved
- 21.7 Priority Commands
- 21.8 Command Queuing
  - 21.8.1 Queue Depth
  - 21.8.2 Queue Full Status
  - 21.8.3 Effects of LIP on Command Queuing
  - 21.8.4 Termination of I/O Processes
- 21.9 Command Reordering
- 21.10 Concurrent I/O Process
- 21.11 Write Cache
- 21.12 Automatic Rewrite/Reallocate
- 21.13 Segmented Caching
  - 21.13.1 Overview
  - 21.13.2 Read Ahead
- 21.14 Multiple Initiator Systems
  - 21.14.1 Sense Data
  - 21.14.2 Mode Pages
- 21.15 Enclosure Services
  - 21.15.1 Enclosure Initiated ESI
- 21.16 Multiple Initiator Environment
  - 21.16.1 Initiator Sense Data
  - 21.16.2 Initiator Mode Select/Mode Sense Parameters
- 21.17 Reset
  - 21.17.1 Reset Sources
  - 21.17.2 Reset Actions
- 21.18 Diagnostics
  - 21.18.1 Power on Diagnostics
  - 21.18.2 Self-test via SEND DIAGNOSTIC Command
- 21.19 Idle Time Function
- 21.20 Command Time out Limits
  - 21.20.1 Reassignment Time
  - 21.20.2 Format Time
  - 21.20.3 Start/Stop Unit Time
  - 21.20.4 Medium Access Command Time
  - 21.20.5 Time-out Limits for Other Commands
- 21.21 Recommended Initiator ERP
  - 21.21.1 Drive Service Strategy
  - 21.21.2 Recommendations for System Error Log
  - 21.21.3 Data Recovery Procedure
  - 21.21.4 Nondata Error Recovery Procedure
22.0 SCSI Sense Data
- 22.1 SCSI Sense Data Format
- 22.2 Sense Data Description
23.0 Appendix. UEC list

Popular Brands

Popular manuals