HP 2000CP 2500CP User Manual

Page 66

Text mode
Original mode

System Error Codes

2-31

HP DesignJet CP Series Printers

HP DesignJet 2500CP/3500CP only

System Error:

08xxxx

Problem Description: PostScript Error.

Corrective Action:

Make sure you have the latest version of the Flash
SIMM (firmware) installed or upgrade the
firmware revision of the Flash SIMM

' page 1-3.

If the error code remains after installing the latest
Flash SIMM then report the error to the HP
Response Center or the nearest HP Support
Office, stating the following information:
D Model and Serial Number of the printer.
D the complete error number.
D service print (Utilities / Service Tests).
D plot file where the error has occurred.
D additional comments about the usage, the

setting, etc..

HP DesignJet 2500CP/3500CP only

System Error:

080001

Problem Description: Hard Disk Drive installed without PostScript.

Corrective Action:

Install the PostScript SIMM in the 2nd slot from
the left in the Electronics Module.