HP 2000CP 2500CP - Manual (Page 119)

Service Tests 4-33 HP DesignJet CP Series Printers
D17. Reset Counters
The purpose of this test is to reset the internal counters.
Perform the Reset Counters test as follows:
This test does not reset the Preventive Maintenance Counter. To
reset the preventive Maintenance Counter perform the
Maintenance Calibration
' 5-19.
1 In the Diagnostics submenu, scroll to “D17 Reset Counters” and press
Enter.
Diagnostics
D17 Reset Counters
2 The “Yes=Enter No=Prev” message is displayed on the front-panel.
3 If you DO NOT want to reset the counters, press the Previous key. The
message “D1700 Cancelled” will be displayed.
4 If you want to reset the counters, press the Enter key. While the
counters are being reset, a row of “***” will be displayed on the
front-panel.
5 When the Counters have been reset, the “D1700 OK” message is
displayed on the front-panel.
6 If the test fails, the “D1701 Fail” message is displayed on the front-panel.
If the test fails, Replace the Electronics Module
' page 8-6.