HP 2000CP 2500CP User Manual

Page 120

4-34

Service Tests

HP DesignJet CP Series Printers

D19. Hard Disk Drive Revision (Only available in DesignJet
2500CP/3500CP printer)

The purpose of this test is to show the revision of the internal Hard Disk
Drive.

Perform the HDD Revision test as follows:

1 In the Diagnostics submenu, scroll to “D19 HDD Revision” and press

Enter.

Diagnostics

D19 HDD Revision

2 A message similar to the following will be displayed on the front-panel.

D19 HDD Revision

D1900 Done XX_XX_XX:

The following table shows the compatibility between the Hard Disk Drive
Revision and the Firmware Revison:

NOTE FOR HP DESIGNJETS 2500CP ONLY

IF THE HARD DISK VERSION IS LOWER THAN A.02.08

THEN YOU MUST INFORM THE CUSTOMER TO ORDER

THE UV UPGRADE KIT BY FAXING THE SHEET THAT

THEY RECEIVED WITH THE PRINTER INFORMING THEM

ABOUT THE UV UPGRADE KIT. THEY CAN ALSO FAX THE

SHEET ON THE FOLLOWING URL:

http://www.hp.com/go/designjet

YOU CAN ALSO ORDER THE FIRMWARE UPGRADE KIT
WHICH INCLUDES A CD-ROM TO UPGRADE THE HARD

DISK DRIVE CONTENTS (REFER TO CHAPTER 7 FOR THE

PART NUMBER).