HP 2000CP 2500CP - Manual (Page 136)

Service Calibrations 5-15 HP DesignJet CP Series Printers
D “C0606 Fail” - The Magenta and Yellow Printheads have failed
D “C0607 Fail” - The Cyan, Magenta and Yellow Printheads have failed
D “C0608 Fail” - The Black Printhead has failed.
D “C0609 Fail” - The Cyan and Black Printheads have failed.
D “C0610 Fail” - The Magenta and Black Printheads have failed.
D “C0611 Fail” - The Cyan, Magenta and Black Printheads have failed.
D “C0612 Fail” - The Yellow and Black Printheads have failed.
D “C0613 Fail” - The Cyan, Yellow and Black Printheads have failed.
D “C0614 Fail” - The Magenta, Yellow and Black Printheads have
failed.
D “C0615 Fail” - The Cyan, Magenta, Yellow and Black Printheads have
failed.
If the calibrations fails, to resolve the problem, try one of the following:
1 If the calibration pattern is bad:
D Try recovering the printheads using the front-panel menu and try
the calibration again.
D If the calibration pattern is bad again, then replace the complete
Ink Delivery System of the color that is bad.
2 If the calibration pattern is good:
D Replace the Carriage Assembly
' page 8-42.
3 Perform the Electronics Test
' page 4-7.
4 Perform the Line Sensor Test
' page 4-10.