HP 2000CP 2500CP - Manual (Page 340)

Glossary-6 HP DesignJet CP Series Printers
SPROC Servo-Processor Code.
Stepper Motor Small motors used in the Ser-
vice Station, Refill Assembly amd the Elevator
Assembly
Swath That portion of a drawing plotted be-
tween advances of the drive roller in Fast mode.
(In Best mode, the drive roller advances half a
swath at a time; in Normal mode, it may advance
a full swath or half a swath, depending on wheth-
er the plot is color or monochrome.)
TCP/IP Transmission Control Protocol / Inter-
net Protocol.
Theta-z Error A print-quality error caused
when the nozzles on a printhead are not perpen-
dicular to the carriage axis. The error shows up
as jagged vertical lines.
Troubleshoot The system of finding the com-
ponent(s) which have failed.
Translucent Describes a type of media through
which light passes.
UART Universal Asynchronous Receiver
Transmitter.
Unidirectional Print Mode A print mode in
which plotting is performed while the carriage
moves in one direction, and no plotting is per-
formed while the carriage moves in the opposite
direction.
Vellum A type of strong paper.
VLS Vertical-line straightness.
X-axis Media axis.
X-axis calibration Accuracy calibration.
Y-axis Carriage axis.