HP 3150 EN - Manual (Page 192)

190 Troubleshooting EN
Service menus
Control panel service menu
Use the control panel menu, under “service,” to set up remote
servicing and to recalibrate the document scanner.
The service portion of the control panel menu is shown below in a
hierarchical diagram:
Table 13. Control panel service menu
Tests in control panel service mode
Brief explanations of tests in the control panel service mode are
shown below:
●
Remote test sets up the product to test through the fax line.
●
Remote setup , followed by Receive setup or Send setup allows
for softswitch settings to be sent or received through the fax line.
●
T.30 protocol trace allows you to set how often the test is run.
Press E NTER /
M ENU to access
the control
panel menu.
Use the < and > keys
to select “Service”
and press
E NTER /
M ENU .
Use the < and > keys to
select one of the
choices below and press
E NTER /M ENU .
Use the < and > keys to
select one of the choices
below and press
Enter/
Menu , or see the display.
Service
Remote test
Remote setup
T.30 protocol trace
Scan correction
Receive setup
Send setup