EverFocus EDR410H - Manual (Page 62)

3.12 System Setup Menu
Diagram 3.23
Diagram 3.23 is a screen shot of the SYSTEM SETUP MENU. This menu is for
setting up any additional options and restoring defaults to the digital recorder. In the
SYSTEM SETUP MENU the following fields are defined as follows:
¾ SYSTEM VERSION: Current system firmware version.
¾ SYSTEM VIDEO FORMAT: NTSC or PAL. System can detect the
input signal type automatically from camera 1 while system is booting up.
Users do not need to set it u
ected by the camera 1, so camera 1
input has to be connected.
YES: Turn the jog to enter the selection window, there are 4 options
available: CANCEL, DEFAULT, LOAD, and SAVE. Select
“LOAD” to upload and save DVR
configuration settings from USB. Select “SAVE” to save existing
p.
Note: The signal type is det
¾ LOAD/SAVE CONFIGURATION:
“CANCEL” for leaving the existing window. Select “DEFAULT” to
load factory default values. Select
54