EverFocus EDR410H - Manual (Page 58)

¾ BUZZER: HDD TEMPERATUR E buzzer.
and 1,
perature is overheated.
NO: Will not stop recording even when HDD’s temperature is
.
ENABLE: To enable a buzzer when HDD’s temperature is higher
than 65
° C.
DISABLE: To disable HDD TEMP. Buzzer.
¾ ALARM OUTPUT: The setting of alarms which are NONE
where 1 means the alarm is enabled.
¾ ALARM DURATION: Permanent
¾ NETWORK ALARM:
YES: To enable network alarm.
NO: To disable network alarm.
¾ SEND EMAIL:
YES: Send an email when HDD’s temperature is overheated.
NO: Will not send an email when HDD’s temperature is overheated.
The email address can be set in the NETWORK SETUP MENU.
¾ STOP RECORD:
YES: Stop recording when HDD’s tem
overheated
50