EverFocus EDR410H - Manual (Page 99)

ƒ
Note: Make sure the modem is in bridge mode. If your Internet
ice Provider is BellSouth you will have a modem/router.
BellSouth provides a Westell modem that includes a built-in
The next step is to open ports within your router. Open virtual ports in
the router (Log into the router using a PC)
EDR Ports to open: 80, 1600, 37260, 37261, 37262, 37263
Note: If your Internet service provider blocks port 80 you
may use a different port to access the DVR through the
DVR’s Network Menu Setup.
ish t tiple users log into ease
open a range for the control and data ports on your router. For
ents to connect to the DVR
¾ If you have a Dynamic IP address and have open the ports simply go to
Chapter 9 to Configure DDNS.
¾ Once you have reached this point and you have restarted the digital
recorder.
¾ To access the DVR from a computer simply open Internet Explorer and
in the address bar type:
http:// and the IP address of your internet service provider.
ƒ
Note: If your Internet service provider blocks port 80 you
may use a different port to access the DVR through the
DVR’s Network
Serv
router. You will need to disable the router functionality.
¾
o
ƒ
ƒ
Note: If you w o have mul the DVR pl
example if you would only like 4 cli
open 1600 and 37260 ~ 37263
Menu Setup.
91