EverFocus EDR410H - Manual (Page 107)

Private IP - The server computer in the LAN (Local Area Netw
be providing the virtual services. If you have a Web server tha
Internet users to access at all times, you would need to enable it.
server is on LAN (Local Area Network) computer 192.168.1.1
port 80, TCP and UDP.
service.
ide Area Network) side that
will be used to access the virtual servic
rvice to
be enabled. If the system time is outside of the scheduled time, the service will
be disabled.
¾ The next step is to open ports within your router. Open virtual ports in
the router.
o
EDR Ports to open: 80, 1600, 37260, 37261, 37262, 37263
ƒ
Note: If your Internet service provider blocks port 80 and you
are using a different port to access the DVR through the
DVR’s Network Menu Setup please open those specific ports
in this section of the router.
¾ If your Internet Service Provider Blocks port 80. Simply do the following:
o
Change the HTTP port from 80 to 8100 in the NETWORK
MENU.
¾ To access the DVR from a computer simply open Internet Explorer and
in the address bar type:
The following is the address you would type:
http:// IP address of your internet service provider: 8100
ork) that will
t you wanted
Web (HTTP)
0 HTTP uses
Protocol Type - The protocol used for the virtual
Public Ports -
The port number on the WAN (W
e.
Schedule - The schedule of time when the virtual service will be enabled.
The schedule may be set to Always, which will allow the particular service to
always be enabled. If it is set to Time, select the time frame for the se
99