EverFocus EDR410H - Manual (Page 28)

recording before making change
the record resource, switch the U of INSTALL. To take full advantage of
ninstalled Camera Ports to OFF in this
section. For covert, select “ON” to cover a camera, and disable the screen
in live mode to show up. However, the image is recorded, and can be
played back by user who has playback right. The covert channels will not
show up on the sequence mode. To change this, simply use the Jog Dial
on the DVR. Press the Enter key to make your selection.
¾ SEQ (MAIN/CALL): Setup a retention period for sequences. To
change this, simply use the Jog Dial on the DVR. Press the Enter key to
make your selection.
¾ REC QUALITY: Select an image quality for recording. Normal record
image quality and event record image quality can be set individually. There
are six different qualities available. A higher image quality needs more
HDD space. To change this, simply use the Jog Dial on the DVR. Press
the Enter key to make your selection. The theory space needed per
second lists below:
ESTIMATE KILOBYTES
SUPERIOR obytes = 0.5 MB
LOW: 256 Kilobytes = 0.25 MB
LOWER: 192 Kilobytes = 0.188 MB
S
f
¾ REC SPEED ON TIME ZONE:
T in the
NU. “N” in the column of “TP”
is the normal recording time.
: 512 Kil
HIGH: 448 Kilobytes = 0.438 MB
STANDARD: 384 Kilobytes = 0.375 MB
BASIC: 320 Kilobytes = 0.313 MB
ince Variable Bit Rate (VBR) might be used, therefore this table is
or your reference only.
P: Scheduled recording time
SCHEDULE SETUP ME
1~8 which can be set
NORMAL: Normal record speed (Images per second) up to 30
IPS. EDR810/410 will adjust to the maximum
recording speed by calculating the total installed
cameras that have enabled in the CAMERA SETUP
MENU.
20