EverFocus EDR410H - Manual (Page 25)

¾
To set the end time of daylight saving time: To set the end
“FROM” time and “TO” time of daylight saving time.
To
end week.
To set the end month of daylight saving time: Dial the jog to set the
END TIME: To set the end time of daylight saving time.
end month.
FEB MAR JAN APR MAY JUN
NOV OCT SEP AUG JUL DEC
set the end week of daylight saving time: Dial the jog to set the
LAST 1 ST 2 ND 3 RD 4 TH
To set the end date of daylight saving time: Dial the jog to set the
end date.
SUN MON TUE WED THU FRI SAT
¾ TIME SYNCHRONIZE: Select “ON” or “OFF” to enable or disable
time synchronize which can let you have correct time automatically when
network is connected. To change this, simply use the Jog Dial on the
DVR. Press the Enter key to make your selection.
¾ TIME SERVER: You can set the time server address where you locate
if you connect to network and enable time synchronize. For checking the
IP address of NTP Server, please follow the steps:
1. Connect your PC to the internet for searching the IP address of
NTP Server.
2. Go to “START” -> “RUN” -> type “Command” and press
“OK”
Under Dos Prompt, type “C:\Ping Pool.NTP.ORG to find out
the IP address of NTP Server.
17